Step 13 Configure digital sending
To configure digital sending, you must know the Internet Protocol (IP)
address of the Simple Mail Transfer Protocol (SMTP) server on your
network. The product uses the SMTP server IP address to send e-
mail messages to other computers.
Optionally, you can have access to a Lightweight Directory Access
Protocol (LDAP) server. LDAP servers hold e-mail addresses and
names, and enable you to associate names (John Smith) with e-mail
If you do not know the IP address of the SMTP or LDAP servers on
your network, you will need to ask your network or e-mail administrator
for this information.
On the touch screen of the graphical display:
Touch Configure Device.
You can touch AutoDiscover to let the product search for the
SMTP address, and then go to step 7. Otherwise, proceed to
Locate SMTP Address on the screen, and then touch the first
Using the numeric keypad, select the first digit of the IP address
of the SMTP server. Continue touching each box and selecting
the digits until you have entered the entire IP address.
For additional information about finding the IP addresses of the SMTP
and LDAP servers, and for alternate procedures for configuring the
product for digital sending, see the user guide.