Change the control panel overlays
The control panel comes either with
English overlays installed or with no
overlays. If necessary, use the procedure
below to change the control panel
Locate the two control panel
Insert a small, flat-bladed
screwdriver or other thin, narrow
device in the slot at the top edge of
one of the overlays.
Lift the overlay up and backward to
move it away from the product.
Position the new overlay over the
control panel. Align the ends of the
overlay with the holes on the control
panel and slide the overlay in.
Snap the overlay firmly onto the
control panel. Ensure that the
overlay is flat against the control
Repeat steps 2 through 5 to change
the second overlay.